Printer Configuration and Adjustment
Adjust Printer Settings
132
P1088680-001 ZT600 Series™ User Guide 5/22/17
TOOLS > RUN ZBI PROGRAM
If ZBI programs have been downloaded to your printer, you may select one to run using this
menu item. If no program exists on your printer,
NONE is listed.
To run a ZBI program that you have downloaded to your printer:
1. Use the UP ARROW or DOWN ARROW to select a file from this menu.
2. Press RIGHT SELECT to select RUN. If no program exists, the RUN option does not
perform an action.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ENERGY STAR
—
CONFIG INFO TO USB
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
APPLCTR ERR: PAUSE
—
PRINT TEST FORMAT
* This menu item appears only if ZBI is enabled on your printer.
Related ZPL command(s): ^JI, ~JI
SGD command used: zbi.control.run
Printer web page: Printer Home Page > Directory Listing
To Next Page
Loading...