Printer Configuration and Adjustment
Adjust Printer Settings
120
P1088680-001 ZT600 Series™ User Guide 5/22/17
TOOLS > PRINT INFORMATION
Print the specified information on one or more labels. This menu item is available through
three user menus with different default values for each.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ENERGY STAR
—
CONFIG INFO TO USB
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
APPLCTR ERR: PAUSE
—
PRINT TEST FORMAT
Accepted values: • SETTINGS—Prints a printer configuration label. (See CONFIG INFO TO
USB on page 130 for other ways to view this information.) A sample label
is shown in Figure 15 on page 121.
• NETWORK—Prints the settings for any print server or Bluetooth device that
is installed. A sample label is shown in Figure 16 on page 121.
• FORMATS—Prints the available formats stored in the printer’s RAM, Flash
memory, or optional memory card.
• IMAGES—Prints the available images stored in the printer’s RAM, Flash
memory, or optional memory card.
• FONTS—Prints the available fonts in the printer, including standard printer
fonts plus any optional fonts. Fonts may be stored in RAM or Flash
memory.
• BARCODES—Prints the available barcodes in the printer. Barcodes may be
stored in RAM or Flash memory.
• ALL—Prints the previous six labels.
• SENSOR PROFILE—Shows the sensor settings compared to actual sensor
readings. To interpret the results, see Sensor Profile on page 240.
To Next Page
Loading...