121
Printer Configuration and Adjustment
Adjust Printer Settings
5/22/17 ZT600 Series™ User Guide P1088680-001
Related ZPL command(s): SETTINGS: ~WC
NETWORK: ~WL
SENSOR PROFILE: ~JG
Others: ^WD
Control panel key(s): SETTINGS and NETWORK: Do one of the following:
• Hold CANCEL during printer power-up. (Formerly called a CANCEL
self test.
• Hold FEED + CANCEL for 2 seconds when the printer is in the Ready
state.
SENSOR PROFILE: Hold
FEED + CANCEL during printer power-up.
Printer web page: View and Modify Printer Settings > Print Listings on Label
Figure 15 • Sample Printer Configuration Label
Figure 16 • Sample Network
Configuration Label
To Next Page
Loading...