125
Printer Configuration and Adjustment
Adjust Printer Settings
5/22/17 ZT600 Series™ User Guide P1088680-001
TOOLS > LOAD DEFAULTS
Restore specific printer, print server, and network settings back to the factory defaults. Use
care when loading defaults because you will need to reload all settings that you changed
manually. This menu item is available through two user menus with different default values for
each.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ENERGY STAR
—
CONFIG INFO TO USB
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
APPLCTR ERR: PAUSE
—
PRINT TEST FORMAT
Accepted values: • FACTORY—Restores all printer settings other than the network settings
back to the factory defaults. Use care when loading defaults because you
will need to reload all settings that you changed manually.
• NETWORK—Reinitializes the printer’s wired or wireless print server. With
a wireless print server, the printer also reassociates with your wireless
network.
• LAST SAVED—Loads settings from the last permanent save.
Related ZPL command(s): FACTORY:
^JUF
NETWORK: ^JUN
LAST SAVED: ^JUR
To Next Page
Loading...