Zebra ZT610 - PRINT WIDTH

Printer Configuration and Adjustment
Adjust Printer Settings
110
P1088680-001 ZT600 Series™ User Guide 5/22/17
SETTINGS > PRINT WIDTH
Specify the width of the labels being used, in dots. The default value is the maximum width for
the printer, based on the printhead’s DPI value.
SETTINGS
—
DARKNESS
—
PRINT SPEED
—
MEDIA TYPE
—
PRINT METHOD
—
TEAR OFF
—
PRINT WIDTH
—
PRINT MODE
—
LABEL TOP
—
LEFT POSITION
—
REPRINT MODE
—
LABEL LENGTH MAX
—
COVER OPEN LIGHT
—
MEDIA PATH LIGHTS
—
RIBBON PATH LIGHTS
—
LANGUAGE
Accepted values:
Note • Setting the width too narrow can result in portions of a label
format not being printed on the media. Setting the width too wide
wastes formatting memory and can cause the printer to print off of the
label and onto the platen roller. This setting can affect the horizontal
position of the label format if the image was inverted using the
^POI
ZPL II command.
ZT610 203 dpi =
0002 to 832
ZT610 300 dpi = 0002 to 1248
ZT610 600 dpi = 0002 to 2496
ZT620 203 dpi = 0002 to 1344
ZT620 300 dpi = 0002 to 1984
Related ZPL command(s): ^PW
SGD command used:
ezpl.print_width
Printer web page: View and Modify Printer Settings > Media Setup > Print Width