Zebra ZT610 - PRINT STATION

137
Printer Configuration and Adjustment
Adjust Printer Settings
5/22/17 ZT600 Series™ User Guide P1088680-001
TOOLS > PRINT STATION
Use this menu item to fill in variable fields in a label format and print the label using a Human
Input Device (HID), such as a USB keyboard, scale, or barcode scanner. A suitable label
format must be stored on the E: drive of the printer to use this option. See the exercises in
Using the USB Hosts Port and the NFC Capabilities on page 261 for an exercise using this
capability.
When you plug an HID into one of the printer’s USB host ports, use this user menu to select a
form on the printer’s E: drive. After you have been prompted to fill in each variable
^FN field
on the form, you can specify the desired quantity of labels to print.
For more information about using the
^FN command or the SGD commands related to this
feature, refer to the Zebra Programming Guide. You can download a copy of the manual from
http://www.zebra.com/manuals/.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ENERGY STAR
—
CONFIG INFO TO USB
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
APPLCTR ERR: PAUSE
—
PRINT TEST FORMAT
* This menu item can be used only if a USB Flash drive with a suitable
label format is inserted into a USB host port on the printer.
SGD command used: usb.host.keyboard_input (must be set to ON)
usb.host.template_list
usb.host.fn_field_list
usb.host.fn_field_data
usb.host.fn_last_field
usb.host.template_print_amount