Printer Configuration and Adjustment
Adjust Printer Settings
112
P1088680-001 ZT600 Series™ User Guide 5/22/17
SETTINGS > LABEL TOP
If necessary, shift the position of the image vertically on the label.
• Negative numbers move the image higher on the label (toward the printhead).
• Positive numbers move the image farther down on the label (away from the printhead) by
the specified number of dots.
SETTINGS
—
DARKNESS
—
PRINT SPEED
—
MEDIA TYPE
—
PRINT METHOD
—
TEAR OFF
—
PRINT WIDTH
—
PRINT MODE
—
LABEL TOP
—
LEFT POSITION
—
REPRINT MODE
—
LABEL LENGTH MAX
—
COVER OPEN LIGHT
—
MEDIA PATH LIGHTS
—
RIBBON PATH LIGHTS
—
LANGUAGE
Accepted values: –120 to +120
Related ZPL command(s): ^LT
SGD command used:
media.printmode
Printer web page: View and Modify Printer Settings > General Setup > Print Mode
To Next Page