Printer Configuration and Adjustment
Adjust Printer Settings
150
P1088680-001 ZT600 Series™ User Guide 5/22/17
NETWORK > WLAN GATEWAY
View and, if necessary, change the default wireless gateway.
To save changes to this setting, set WLAN IP PROTOCOL on page 151 to
PERMANENT, and
then reset the print server (see RESET NETWORK on page 158). See IP Address Changing
on page 259 for additional information.
NETWORK
—
ACTIVE PRINT SERVER
—
PRIMARY NETWORK
—
WIRED IP ADDRESS
—
WIRED SUBNET MASK
—
WIRED GATEWAY
—
WIRED IP PROTOCOL
—
WIRED MAC ADDRESS
—
WLAN IP ADDRESS
—
WLAN SUBNET MASK
—
WLAN GATEWAY
—
WLAN IP PROTOCOL
—
WLAN MAC ADDRESS
—
ESSID
—
CHANNEL
—
SIGNAL
—
IP PORT
—
IP ALTERNATE PORT
—
PRINT INFORMATION
—
RESET NETWORK
—
VISIBILITY AGENT
—
LOAD DEFAULTS
Accepted values: 000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
wlan.ip.gateway
Printer web page: View and Modify Printer Settings > Network Communications Setup >
Wireless Setup
To Next Page
Loading...