259
Diagnostics and Troubleshooting
Troubleshooting—Miscellaneous Issues
5/22/17 ZT600 Series™ User Guide P1088680-001
IP Address Changing
Issue Possible Cause Recommended Solution
My printer reassigns a
new IP address to the
print server after the
printer has been off for
a while.
The settings for your network
are causing the network to
reassign a new IP address.
If the printer changing IP addresses causes issues
for you, follow these steps to assign it a static IP
address:
1. Find out what values need to be assigned to
the IP address, subnet mask, and gateway for
your print server (wired, wireless, or both).
2. Change the appropriate IP protocol value to
PERMANENT. See WIRED IP PROTOCOL
on page 146 or WLAN IP PROTOCOL
on page 151.
3. Change the values for the IP address, subnet
mask, and gateway for the appropriate print
server to what you want them to remain.
Wired:
WIRED IP ADDRESS on page 143
WIRED SUBNET MASK on page 144
WIRED GATEWAY on page 145
Wireless:
WLAN IP ADDRESS on page 148
WLAN SUBNET MASK on page 149
WLAN GATEWAY on page 150
4. Reset the network using RESET NETWORK
on page 158 to save the changes.
To Next Page
Loading...