Diagnostics and Troubleshooting
Printer Diagnostic Tests—Print Test Format Option
234
P1088680-001 ZT600 Series™ User Guide 5/22/17
PRINT LINE
The printer initiates a test sequence that prints an ink/printhead test image multiple times and
at varying speeds. These test labels can be used when making adjustments to the printer’s
mechanical assemblies or to determine if any printhead elements are not working.
During each phase of the test sequence, the printer prints a number of labels at a particular
speed and then pauses.
• Press
PAUSE to print additional labels at the same speed.
• Press
CANCEL to move to the next phase of the test sequence.
• Press and hold CANCEL to exit the test sequence.
As an alternate way to initiate the PRINT LINE test sequence, reboot the printer while holding
PAUSE. Release PAUSE when the first control panel light turns off. (Formerly called a
PAUSE self test.)
Phase
Number of Labels
Printed Each Time
Print Speed
1 15 labels the printer’s slowest speed
2 15 labels 6 in. (152 mm) per second
3 50 labels the printer’s slowest speed
4 50 labels 6 in. (152 mm) per second
5 50 labels the printer’s maximum speed
To Next Page
Loading...