Specifications
General Specifications
278
P1088680-001 ZT600 Series™ User Guide 5/22/17
Communication
Interfaces
(continued)
Optional Wireless print server
See Wireless Specifications on page 281 for more information.
Limitations and Requirements
• Can print to the printer from any computer on your Wireless
Local Area Network (WLAN).
• Can communicate with the printer through the printer’s web
pages.
• The printer must be configured to use your WLAN.
• Can be installed only in the top option slot.
Configuration
Refer to the ZebraNet Wired and Wireless Print Servers User
Guide for configuration instructions. A copy of this manual is
available at http://www.zebra.com/manuals.
IEEE 1284 Bidirectional Parallel data interface
Limitations and Requirements
• Maximum cable length of 10 ft (3 m).
• Recommended cable length of 6 ft (1.83 m).
• No printer parameter changes required to match the host
computer.
• Can be installed in either the top or bottom option slot.
Connections and Configuration
No additional configuration is necessary.
Applicator interface
with DB15F connector
External ZebraNet 10/100 Print Server
Requires the parallel data interface option
Memory 1 Gigabyte DRAM (32 MB user available)
2 Gigabyte Flash (512 MB user available on-board Flash)
ZT610™ ZT620™
To Next Page
Loading...