33
Printer Setup and Operation
Load the Media
5/22/17 ZT600 Series™ User Guide P1088680-001
2. Remove and discard any tags or labels that are torn or dirty or that are held by adhesives or
tape.
3. Insert roll or fanfold media into the printer.
Roll Media
Place the roll of media on the media supply spindle. Push the roll as far back as it will go.
Fanfold Media
Fanfold media can be stored behind or under the printer. Depending on where the media is
stored, feed the media from behind or through the bottom access slot.
Rear Feed Bottom Feed
To Next Page
Loading...