37
Printer Setup and Operation
Load the Media—Tear-Off Mode
5/22/17 ZT600 Series™ User Guide P1088680-001
5. Rotate the media guide adjustment knob as shown until the media guide just touches the
edge of the media.
6. Does the media that you are using require ribbon for printing? If you are not sure, see
When to Use Ribbon on page 24.
If using… Then…
Direct Thermal media (no ribbon needed) Continue with step 7.
Thermal Transfer media (ribbon needed)
a. If you have not already done so,
load ribbon in the printer. See
Load the Ribbon on page 58.
b. Continue with step 7.
To Next Page
Loading...