Printer Setup and Operation
Load the Media—Rewind Mode
52
P1088680-001 ZT600 Series™ User Guide 5/22/17
14. Set the printer to Rewind mode (for more information, see PRINT MODE on page 111).
15. Press PAUSE to exit pause mode and enable printing.
The printer may perform a label calibration or feed a label, depending on your settings.
16. For best results, calibrate the printer. See Calibrate the Ribbon and Media Sensors
on page 192.
17. If desired, print a configuration or other label to verify that your printer is able to print.
(See PRINT INFORMATION on page 120.)
Media loading in Rewind mode is complete.
To Next Page
Loading...