Printer Setup and Operation
Install the Printer Driver and Connect the Printer to the Computer—USB
72
P1088680-001 ZT600 Series™ User Guide 5/22/17
1. Click Next.
The System Prepare Wizard prompts you to connect the printer to the USB port on your
computer.
2. Click Finish.
The Zebra Setup Utilities screen displays.
Connecting the printer to a USB port on your computer
Complete the steps in this section only after the System Prepare Wizard prompts you to do so
or after you have opened the Zebra Setup Utilities program. If necessary, complete the steps in
Install Zebra Setup Utilities on page 62 before continuing.
Figure 9 • Zebra Setup Utilities Screen
To Next Page
Loading...