99
Printer Setup and Operation
Print a Test Label and Make Adjustments
5/22/17 ZT600 Series™ User Guide P1088680-001
5. Did the printer configuration label print, and is the print quality acceptable?
If... Then...
The label printed and the
print quality is acceptable
Your printer is ready for printing. Continue with the
label designer program of your choice. You may use
ZebraDesigner™, which you can download from
http://www.zebra.com.
The label did not print
a. Close the Tools window and make sure that you
selected the correct printer driver before you click
Open Printer Tools. Try printing the label again.
b. If the label still did not print, check the connections
between your printer and your computer or your
printer and your network.
c. If necessary, modify the printer’s settings to make
them match your computer’s settings.
The label prints, but with
poor quality or other issues
See Diagnostics and Troubleshooting on page 227.
To Next Page
Loading...