Cleaning and Changing Filters
Engine Oil Filter
Cleaning Oil Water Separator of Fuel Filter
Change / Vent Fuel Pre-Filter
Using the oil filter wrench to loosen the filter, turn the filter
anticlockwise to remove it. Lightly grease the new oil filter
sealing to fix it in the correct position and perfect
tightness. Turn clockwise until the sealing reaches the
base, then rotate another 2/3 turn to tighten it properly.
1. Engine Oil Filter
HODP118
1 - Fuel filter
2 - Main Fuel filter
3 - Pre Fuel filter
HODP119
1. Fuel Supply to the Pump
2. Venting Screw
3. Electrical Connection of the Water Level Sensor
4. Drain Plug
5. Filter Element
6. Fuel Supply from Fuel Tank
HODP120
To Next Page
Loading...
Need help?
General