MAINTENANCE AND FUNCTION / TROUBLESHOOTING AND ADJUSTMENTS
70
Can I print a few models on one platform and print them together?
Yes. You can multiple one object or put a few dierent objects for one print.
What is the SLA?
It is the oldest method of incrementally building models.
What is the SLS?
Selective laser sintering used in the eld of 3D printing. The accuracy of the pro
totype is 0.1 mm or less. Both SLA and SLS are much more expensive than FDM.
What is the approximate price of 3D printing ?
The prices depend on element you want to print,
precision and amount of plastic used
Warranty
Warranty covers following components :
∙ standard plastic extruder module with heated nozzle, stepper motor
with planetary gears, temperature sensor and cartridge heater.
∙ heated bed module, with kapton heater, temperature sensor,
plug and cables.
∙ electronics module, with onboard - SD card, connectors and fuses
for heaters and motor inputs.
∙ mechanical parts of X, Y and Z axis, as well as stepper motors.
In case of technical fault caused by material wear or improper assembly, if still in
warranty period, user can send faulty module to ZMorph headquaters, where it
will be exchanged and shipped back as soon as possible.
Warranty covers 1 year from date of delivery and can be extended.
?
?
?
?
?
To Next Page
Loading...
Need help?
General
