Zte Legacy - System Sounds and Tones; Phone Ringtone; Vibration Settings

77 - Settings
to enable vibration mode, or touch
to enable sound.
 Press the lower end of the Volume Button
when no media application is active. When
the icon appears on the status bar,
vibration mode is enabled. When the
icon appears on the status bar, both sound
and vibration are turned off.
Phone Ringtone
You can select and assign a default ringtone
for your incoming calls. If you want to assign a
special ringtone for an individual contact, edit
the contact and select a ringtone, see Edit a
Contact on page 33.
1. From the home screen, touch >
Settings > Sound > Phone
ringtone.
2. Scroll through the ringtone list, music file
list or recorded sound list and select the
ringtone you want to use.
3. Touch OK.
Vibration Settings
Your phone's sound settings let you
determine when vibration is used and also
what pattern of vibration is in use.
Vibrate When Ringing
You can let the phone vibrate the same time it
rings.
 From the home screen, touch >
Settings > Sound and check Vibrate
when ringing.
Vibrate Pattern
You can select how the phone vibrates when
it rings.
1. From the home screen, touch >
Settings > Sound > Vibrate pattern.
2. Choose the vibrate pattern you like and
touch OK.
System Sounds and Tones
The options in the SYSTEM section in sound
settings let you select whether you hear tones
when receiving notifications, touching
numbers on the dialpad, selecting onscreen
options, and more.
1. From the home screen, touch >
Settings > Sound.
2. Set the following options. Select or
deselect the available checkboxes to
enable or disable the options as desired.
 Default notification: Assign specific
sound for notifications. Scroll through
the Notification tone list, music file list,
or recorded sound list and select one
as the default notification sound.
 Missed notification alert: Allow your
phone to notify you of new messages,
missed calls, and other notifications by
playing a sound every few minutes.
 Dial pad touch tones: Play tones
when using the dial pad.
 Touch sounds: Play sound when
making an onscreen selection.