Chapter 10 Dynamic DNS Setup
eir F1000 Modem User’s Guide
The following table describes the fields in this screen.
Table 69 Network Setting > DNS > > Dynamic DNS
Select Enable to use dynamic DNS.
Select your Dynamic DNS service provider from the drop-down list box.
Type the domain name assigned to your Device by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
Type the password assigned to you.
User
Authentication
Result
This field shows whether or not the DDNS server has accepted the account information you
provided to use your DDNS service.
This field shows the most recent date and time the dynamic DNS information was updated.
This field shows the WAN IP address the Device is currently using.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.