eir F1000 Modem User’s Guide
Click Security > Firewall > Protocol to display the following screen.
Figure 110 Security > Firewall > Protocol
The following table describes the labels in this screen.
Table 77 Security > Firewall > Protocol
Click this to add a new service.
This is the name of your customized service.
This is the description of your customized service.
This shows the IP protocol (TCP, UDP, ICMP, or TCP/UDP) and the port number or range
of ports that defines your customized service. Other and the protocol number displays if the
service uses another IP protocol.
Click the Edit icon to edit the entry.
Click the Delete icon to remove this entry.
13.3.1 Add/Edit a Service
Use this screen to add a customized service rule that you can use in the firewall’s ACL rule
configuration. Click Add new service entry or the edit icon next to an existing service rule in the
Service screen to display the following screen.
Figure 111 Service: Add/Edit
To Next Page
Loading...
