ZyXEL Communications eir F1000 - The Broadband Screen

45
eir F1000 Modem User’s Guide
Chapter 4 Broadband
Figure 22 Dual Stack Lite
LAN
- IPv6
- IPv4
WAN
- IPv6
- IPv4 in IPv6
IPv6
+
IPv4
ISP (IPv6)
IPv6 Internet
IPv6
IPv4 in IPv6
AFTR
IPv4 Internet
4.1.3 Before You Begin
You need to know your Internet access settings such as encapsulation and WAN IP address. Get this
information from your ISP.
4.2 The Broadband Screen
Use this screen to change your Device’s Internet access settings. Click Network Setting >
Broadband from the menu. The summary table shows you the configured WAN services
(connections) on the Device.
Figure 23 Network Setting > Broadband
The following table describes the labels in this screen.
Table 5 Network Setting > Broadband
LABEL
DESCRIPTION
Add New WAN
Interface
Click this button to create a new connection.
#
This is the index number of the entry.
Name
This is the service name of the connection.
Type
This shows whether it is an ATM, Ethernet or a PTM connection.
Mode
This shows whether the connection is in routing or bridge mode.
Encapsulation
This is the method of encapsulation used by this connection.