ZyXEL Communications eir F1000 - The Add Trust Domain Screen

251
eir F1000 Modem User’s Guide
Chapter 28 Remote Management
28.4 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the Device. Click the Add
Trust Domain button in the Maintenance > Remote MGMT > Turst Domain screen to open the
following screen.
Figure 149 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
Table 116 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
LABEL
DESCRIPTION
IPv4 Address
Enter a public IPv4 IP address which is allowed to access the service on the Device from the
WAN.
Apply
Click Apply to save your changes back to the Device.
Cancel
Click Cancel to restore your previously saved settings.