ZyXEL Communications eir F1000 - Chapter 29 TR-064; Overview; The TR-064 Screen

29
253
eir F1000 Modem User’s Guide
TR-064
29.1 Overview
This chapter explains how to configure the Device’s TR-064 auto-configuration settings.
29.2 The TR-064 Screen
TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum. TR-064 is built on
top of UPnP. It allows the users to use a TR-064 compliant CPE management application on their
computers from the LAN to discover the CPE and configure user-specific parameters, such as the
username and password.
Click Maintenance > TR-064 to open the following screen.
Figure 150 Maintenance > TR-064
The following table describes the fields in this screen.
Table 117 Maintenance > TR-064
LABEL
DESCRIPTION
State
Select Enable to activate management via TR-064 on the LAN.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.