eir F1000 Modem User’s Guide
Chapter 10 Dynamic DNS Setup
10.2.1 Add/Edit DNS Entry
You can manually add or edit the Device’s DNS name and IP address entry. Click Add new DNS
entry in the DNS Entry screen or the Edit icon next to the entry you want to edit. The screen
shown next appears.
Figure 98 DNS Entry: Add/Edit
The following table describes the labels in this screen.
Table 68 DNS Entry: Add/Edit
Enter the host name of the DNS entry.
Enter the IPv4 IP address of the DNS entry.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
10.3 The Dynamic DNS Screen
Use this screen to change your Device’s DDNS. Click Network Setting > DNS > Dynamic DNS.
The screen appears as shown.
Figure 99 Network Setting > DNS > Dynamic DNS
To Next Page
Loading...
