eir F1000 Modem User’s Guide
Chapter 32 E-mail Notification
32.2.1 Email Notification Edit
Click the Add button in the Email Notification screen. Use this screen to configure the required
information for sending e-mail via a mail server.
Figure 155 Email Notification > Add
The following table describes the labels in this screen.
Table 121 Email Notification > Add
Enter the server name or the IP address of the mail server for the e-mail address specified
in the Account Email Address field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Enter the user name (up to 32 characters). This is usually the user name of a mail account
you specified in the Account Email Address field.
Enter the password associated with the user name above.
Enter the e-mail address that you want to be in the from/sender line of the e-mail
notification that the Device sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be authenticated
by the mail server as well.
Click this button to save your changes and return to the previous screen.
Click this button to begin configuring this screen afresh.
To Next Page
Loading...
