ZyXEL Communications eir F1000 - Leds (Lights)

20
eir F1000 Modem User’s Guide
Chapter 1 Introducing the Device
5 G
Printer Server
The Device allows you to share a USB printer on your LAN. You can do this by connecting a USB
printer to one of the USB ports on the Device and then configuring a TCP/IP port on the computers
connected to your network.
Figure 4 Sharing a USB Printer
1.5 LEDs (Lights)
The following graphic displays the labels of the LEDs.
Figure 5 LEDs on the Device
2.4 G
None of the LEDs are on if the Device is not receiving power.
Table 1 LED Descriptions
LED
COLOR
STATUS
DESCRIPTION
PWR/SYS
Green
On
The Device is receiving power and ready for use.
Blinking
The Device is self-testing.
Red
On
The Device detected an error while self-testing, or there is a device
malfunction.
Off
The Device is not receiving power.
DSL
Green
On
The ADSL or VDSL line is up.
Blinking
The Device is initializing the ADSL or VDSL line.
Off
The DSL line is down.