ZyXEL Communications eir F1000 - Page 21

21
eir F1000 Modem User’s Guide
Chapter 1 Introducing the Device
Table 1 LED Descriptions (continued)
LED
COLOR
STATUS
DESCRIPTION
INTERNET
Green
On
The Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
DSL connection is up.
Blinking
The Device is sending or receiving IP traffic.
Off
There is no Internet connection or the gateway is in bridged mode.
Red
On
The Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
WAN
Green
On
The Device has a successful 1000 Mbps Ethernet connection on the
WAN.
Blinking
The Device is sending or receiving data to/from the WAN at 1000 Mbps.
Orange
On
The Device has a successful 10/100 Mbps Ethernet connection on the
WAN.
Blinking
The Device is sending or receiving data to/from the WAN at 10/100
Mbps.
Off
There is no Ethernet connection on the WAN.
LAN
Green
On
The Device has a successful 1000 Mbps Ethernet connection with a
device on the Local Area Network (LAN).
Blinking
The Device is sending or receiving data to/from the LAN at 1000 Mbps.
Off
The Device does not have an Ethernet connection with the LAN.
WiFi 2.4G
Green
On
The 2.4 GHz wireless network is activated.
Blinking
The Device is communicating with other wireless clients.
Orange
Blinking
The Device is setting up a WPS connection.
Off
The 2.4 GHz wireless network is not activated.
Phone1,
Phone2
Green
On
A SIP account is registered for the phone port.
Blinking
A telephone connected to the phone port has its receiver off of the hook
or there is an incoming call.
Orange
On
A SIP account is registered for the phone port and there is a voice
message in the corresponding SIP account.
Blinking
A telephone connected to the phone port has its receiver off of the hook
and there is a voice message in the corresponding SIP account.
Off
The phone port does not have a SIP account registered.
USB1
Green
On
The Device recognizes a USB connection through the USB1 slot.
Blinking
The Device is sending/receiving data to /from the USB device connected
to it.
Off
The Device does not detect a USB connection through the USB1 slot.
USB2
Green
On
The Device recognizes a USB connection through the USB2 slot.
Blinking
The Device is sending/receiving data to /from the USB device connected
to it.
Off
The Device does not detect a USB connection through the USB2 slot.