eir F1000 Modem User’s Guide
5.7.1 WDS Scan
You can click the Scan icon in Wireless > WDS to have the Device automatically search and
display the available APs within range. Select an AP and click Apply to have the Device establish a
wireless link with the selected wireless device.
Figure 44 WDS: Scan
The following table describes the labels in this screen.
Table 24 WDS: Scan
Wireless Bridge Scan Setup
Click Refresh to update the table.
This is the index number of the entry.
This shows the SSID of the available wireless device within range.
This shows the MAC address of the available wireless device within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
5.8 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Others. The screen appears as shown.
To Next Page
Loading...
