Chapter 11 Interface Group
eir F1000 Modem User’s Guide
Table 71 Interface Group Configuration (continued)
Click Apply to save your changes back to the Device.
Click Cancel to exit this screen without saving.
11.2.2 Interface Grouping Criteria
Click the Add button in the Interface Grouping Configuration screen to open the following
screen.
Figure 103 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 72 Interface Grouping Criteria
Enter the source MAC address of the packet.
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic,
such as the type of the hardware or firmware.
Enable
wildcard on
DHCP
option 60
option
Select this option to be able to use wildcards in the Vendor Class Identifier configured for
DHCP option 60.
Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN
connection index number.
To Next Page
Loading...
