Chapter 11 Interface Group
eir F1000 Modem User’s Guide
Table 72 Interface Grouping Criteria (continued)
Select DUID-LLT (DUID Based on Link-layer Address Plus Time) to enter the hardware
type, a time value and the MAC address of the device.
Select DUID-EN (DUID Assigned by Vendor Based upon Enterprise Number) to enter the
vendor’s registered enterprise number.
Select DUID-LL (DUID Based on Link-layer Address) to enter the device’s hardware type
and hardware address (MAC address) in the following fields.
Select Other to enter any string that identifies the device in the DUID field.
Select this and enter vendor specific information of the matched traffic.
Enter the vendor’s 32-bit enterprise number registered with the IANA (Internet Assigned
Numbers Authority).
Specify the vendor’s OUI (Organization Unique Identifier). It is usually the first three bytes
of the MAC address.
Enter the product class of the device.
Enter the model name of the device.
Enter the serial number of the device.
Click Apply to save your changes back to the Device.
Click Cancel to exit this screen without saving.
To Next Page
Loading...
