Chapter 11 Interface Group
eir F1000 Modem User’s Guide
In the following example, the client that sends packets with the DHCP Vendor ID option set to MSFT
5.0 (meaning it is a Windows 2000 DHCP client) is assigned the IP address 192.168.2.2 and uses
the WAN VDSL_PoE/ppp0.1 interface.
Figure 100 Interface Grouping Application
Default: ETH 2~4
192.168.1.x/24
eth10.0
192.168.2.x/24
VDSL_PoE/ppp0.1
Internet
DHCP Vendor ID option: MSFT 5.0
Click Network Setting > Interface Group to open the following screen.
Figure 101 Network Setting > Interface Group
The following table describes the fields in this screen.
Table 70 Network Setting > Interface Group
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the WAN interfaces in the group.
This shows the LAN interfaces in the group.
This shows the filtering criteria for the group.
Click the Delete icon to remove the group.
Click this button to create a new group.
11.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Group screen to open the following
screen. Use this screen to create a new interface group.
To Next Page
Loading...
