Chapter 20 Traffic Status
eir F1000 Modem User’s Guide
20.4 The NAT Status Screen
Click System Monitor > Traffic Status > NAT to open the following screen. The figure in this
screen shows the NAT session statistics for hosts currently connected on the Device.
Figure 139 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Table 106 System Monitor > Traffic Status > NAT
Select how often you want the Device to update this screen.
This displays the name of the connected host.
This displays the IPv4 IP address of the connected host.
This displays the MAC address of the connected host.
This displays the number of NAT sessions currently opened for the connected
host.
This displays what percentage of NAT sessions the Device can support is currently
being used by all connected hosts.