ZyXEL Communications eir F1000 - Navigation Panel

29
eir F1000 Modem User’s Guide
Chapter 2 The Web Configurator
After you click Connection Status, the Connection Status screen is displayed. See Chapter 3 on
page 40 for more information.
If you click Virtual Device on the Connection Status screen, a visual graphic appears, showing
the connection status of the Device’s ports. The connected ports are in color and disconnected ports
are gray.
Figure 12 Virtual Device
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure Device features. The
following tables describe each menu item.
Table 2 Navigation Panel Summary
LINK
TAB
FUNCTION
Connection Status
This screen shows the Device’s interface and system information.
Network Setting
Broadband
Broadband
Use this screen to view and configure ISP parameters, WAN IP
address assignment, and other advanced properties. You can also add
new WAN connections.
3G Backup
Use this screen to configure 3G WAN connection.
Advanced
Use this screen to enable or disable PTM over ADSL, Annex M/Annex
J, and DSL PhyR functions.
802.1x
Use this screen to view and configure the IEEE 802.1x settings on the
Device.