eir F1000 Modem User’s Guide
Chapter 28 Remote Management
Table 114 Maintenance > Remote MGMT (continued)
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Select a certificate the HTTPS server (the Device) uses to authenticate itself to the HTTPS
client. You must have certificates already configured in the Certificates screen.
Click Apply to save your changes back to the Device.
Click Cancel to restore your previously saved settings.
28.3 The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the Device through
the services configured in the Maintenance > Remote MGMT screen. Click Maintenance >
Remote MGMT > Turst Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the Device from the WAN
through the specified services.
Figure 148 Maintenance > Remote MGMT > Trust Domain
The following table describes the fields in this screen.
Table 115 Maintenance > Remote MGMT > Trust Domain
Click this to add a trusted host IP address.
This field shows a trusted host IP address.
Click the Delete icon to remove the trust IP address.
To Next Page
Loading...
