ZyXEL Communications eir F1000 - Page 46

46
eir F1000 Modem User’s Guide
Chapter 4 Broadband
Table 5 Network Setting > Broadband (continued)
LABEL
DESCRIPTION
802.1p
This indicates the 802.1p priority level assigned to traffic sent through this connection. This
displays N/A when there is no priority level assigned.
802.1q
This indicates the VLAN ID number assigned to traffic sent through this connection. This
displays N/A when there is no VLAN ID number assigned.
IGMP Proxy
This shows whether the Device act as an IGMP proxy on this connection.
NAT
This shows whether NAT is activated or not for this connection.
Default
Gateway
This shows whether the Device use the WAN interface of this connection as the system
default gateway.
IPv6
This shows whether IPv6 is activated or not for this connection. IPv6 is not available when
the connection uses the bridging service.
MLD Proxy
This shows whether Multicast Listener Discovery (MLD) is activated or not for this
connection. MLD is not available when the connection uses the bridging service.
Modify
Click the Edit icon to configure the WAN connection.
Click the Delete icon to remove the WAN connection.