eir F1000 Modem User’s Guide
Appendix A Setting up Your Computer’s IP Address
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux 9.0.
Procedure, screens and file location may vary depending on your Linux distribution and release
version.
Note: Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1 Click the Red Hat button (located on the bottom left corner), select System Setting and click
Network.
Figure 196 Red Hat 9.0: KDE: Network Configuration: Devices
To Next Page
Loading...
