eir F1000 Modem User’s Guide
The following table describes the labels in this screen.
Table 18 Network Setting > Wireless > More AP
This is the index number of the entry.
This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active.
A gray bulb signifies that this SSID is not active.
An SSID profile is the set of parameters relating to one of the Device’s BSSs. The SSID
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client
scans for an AP to associate with, this is the name that is broadcast and seen in the wireless
client utility.
This field indicates the security mode of the SSID profile.
This displays if the guest WLAN function has been enabled for this WLAN.
If Home Guest displays, clients can connect to each other directly.
If External Guest displays, clients are blocked from connecting to each other directly.
N/A displays if guest WLAN is disabled.
Click the Edit icon to configure the SSID profile.
To Next Page
Loading...
