ZyXEL Communications eir F1000 - Page 80

80
eir F1000 Modem User’s Guide
Chapter 5 Wireless
Table 19 Network Setting > Wireless > More AP > Edit (continued)
LABEL
DESCRIPTION
Max clients
Specify the maximum number of clients that can connect to this network at the same time.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Enhanced
Multicast
Forwarding
Select this check box to allow the Device to convert wireless multicast traffic into wireless
unicast traffic.
Guest WLAN
Select this to create Guest WLANs for home and external clients. Select the WLAN type in
the Access Scenario field.
Access
Scenario
If you select Guest Home, clients can connect to each other directly. A Home Guest
screen appears. A graphic shows whether the wireless clients can access other clients in the
same wireless network and in other networks. Click Apply to save the change before closing
the screen. Click Cancel to close the screen without saving the change.
If you select External Guest, clients are blocked from connecting to each other directly. A
External Guest screen appears. A graphic shows whether the wireless clients can access
other clients in the same wireless network and in other networks. Click Apply to save the
change before closing the screen. Click Cancel to close the screen without saving the
change.
Max. Upstream
Bandwidth
Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN in
kilobits per second (Kbps).
Max.
Downstream
Bandwidth
Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN in
kilobits per second (Kbps).