Chapter 9 Status Center
Cloud Storage User’s Guide
104
9.1.2 Network
The Network screen display the NAS connection status. From Status Center screen, click
Network to open the screen as shown.
Figure 59 Status Center > System Information
LAN1 MAC Address This displays the NAS’s unique physical hardware address (MAC) for the LAN1
Ethernet port. You need the MAC address to register the product at myZyXEL.com.
Customer support may also request it for troubleshooting purposes.
LAN2 MAC Address This displays the NAS’s unique physical hardware address (MAC) for the LAN2
Ethernet port.
CPU This displays a summary of CPU usage by all current processes.
Note: If too many users are using the NAS then the NAS may appear sluggish.
Memory This shows how much of the NAS's total memory is being used.
Process Name This displays the top 10 processes that occupy the most CPU usage.
CPU Usage This displays a summary of CPU usage by all current processes.
Memory Usage This shows how much of the NAS's total memory is being used.
CPU Temperature This displays the temperature near the NAS’s CPU. The NAS generates an
emergency log if the temperature goes out of the normal operating range. If the
temperature goes even higher, the NAS shuts down automatically to avoid
damage from overheating. If the NAS overheats, make sure the fans are working
and it is in a well ventilated place.
Fan Speed This is the RPM (Rotations Per Minute) of the NAS’s fans.
Table 37 Status Center > System Information (continued)
LABEL DESCRIPTION
To Next Page
Loading...
