Chapter 26 Maintenance Screens
Cloud Storage User’s Guide
309
Figure 191 Maintenance > Log > Report Config: Report Setting
The following table describes the labels in this screen.
26.4.4 Syslog Server Setting
You can enable the syslog server and select the categories to include in the log report. In the
Report Config screen, click the Syslog Server Setting tab to open the following screen.
Table 118 Maintenance > Log > Report Config: Report Setting
LABEL DESCRIPTION
Email Alert Select the Enable Email Log check box to have the NAS send an alert email to the
configured email address whenever the NAS generates a critical severity log.
Report Time Select how often (Weekly, Daily or Hourly), the day of the week (for weekly reports), and
the time (hour:minutes) the NAS sends a report email.
Enable Email
Log
Select the check box to have the NAS email reports of all logs the NAS generates to the
configured email address.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
To Next Page
Loading...
