Chapter 14 Tutorials
Cloud Storage User’s Guide
191
14.13.2 Go Menu
4 In the Finder, click Go > Connect to Server.
5 When the Connect to Server dialog box opens, enter smb:// and the NAS’s IP address in the
Server Address field. You may also click Browse to have the Mac search for the NAS. Click
Connect.
6 Once you establish the connection, you can access the NAS from the Finder or directly from the
desktop.
14.14 How to Use the BackupPlanner
Note: The screens and links in this section appear only after you have installed and
enabled BackupPlanner. BackupPlanner is an application that you can install using
Package Management (see Chapter 18 on page 246.)
Use the NAS’s BackupPlanner to have a backup of your files and folders.
To Next Page
Loading...
