Chapter 18 Packages
Cloud Storage User’s Guide
250
18.4 TFTP Server Screen
Trivial File Transfer Protocol (TFTP) is an Internet file transfer protocol similar to FTP and often used
for transmitting large numbers of small files. Use this screen to configure the NAS to accept log files
from TFTP clients such as ZyXEL’s G-4100 v2.
Note: You may need to configure any firewalls between the NAS and the TFTP clients in
order to let the log files go to the NAS.
Click Applications > TFTP Server to open the following screen.
Figure 150 Applications > TFTP Server
The following table describes the labels in this screen.
Table 87 Applications > TFTP Server
LABEL DESCRIPTION
Enable TFTP Server Select this to have the NAS accept log files from TFTP clients. Clear it to stop the NAS
from accepting log files from TFTP clients.
Upload / Download
Directory Setting
Click View Files to browse to where you want to store the log files on the NAS.
Shares Select the share in which to store the log files.
Path Use this if you want to further specify a folder within the share This field displays the
share folder’s path. Type the location of the folder using forward slashes as branch
separators or use Browse to find or create a folder on the NAS.
Apply Click this to save your changes.
Reset Click this to restore the screen’s last-saved settings.
To Next Page
Loading...
