Chapter 19 Auto Upload
Cloud Storage User’s Guide
272
19.5.2 FTP Uploadr Preferences Screen
Use this screen to configure the general settings for the FTP Uploadr.
In the FTP Uploadr screen, click the Preferences icon to open the following screen.
Figure 166 Applications > Auto Upload > FTP Uploadr > Preferences
The following table describes the labels in this screen.
Password Enter the password associated with the account name.
Port Number Enter the port number for the FTP server.
Remote Path Enter the path of the FTP server where the NAS automatically uploads files.
Description Enter additional information about this FTP server.
Test Connection Click this to test your settings and check whether you can use the settings to connect to
the FTP server.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
Table 97 Applications > Auto Upload > FTP Uploadr > Add or Edit a Server (continued)
LABEL DESCRIPTION
Table 98 Applications > Auto Upload > FTP Uploadr > Preferences
LABEL DESCRIPTION
Folder Watch List
Status This field indicates whether the share or folder is available.
represents a valid folder. The folder is available for auto upload.
represents a missing folder. The share may be deleted from the NAS, or the hard
disk was removed from the NAS.
Share Name This is the share selected for auto upload.
Path This is the path of a folder selected for auto upload. The NAS only uploads files stored in
the specified share or folder to your FTP server.
Action Use the Remove icon to delete a folder from the Folder Watch List.
To Next Page
Loading...
