Chapter 16 System Setting
Cloud Storage User’s Guide
209
The following table describes the labels in this screen.
16.5 Server Name Screen
Click System Setting > Server Name to open the following screen. Use this screen to configure
your CIFS settings. In this screen you can set your server name and specify if your NAS is a part of
a workgroup.
Note: CIFS cannot be disabled on the NAS.
Figure 115 System Setting > Server Name
Table 64 System Setting > Packages > Package Info
LABEL DESCRIPTION
Status This is the current status of the application. It shows:
• Not Installed - This displays for applications that have not been installed by the NAS.
• Installing (%) - This displays when the application is being installed. It also shows
the percent of the package already installed.
• Built-in - This displays for applications installed by the NAS that you can configure in
the NAS Web Configurator.
• Enabled - This displays for applications installed and enabled by the NAS that have
their own web configurators.
• Disabled - This displays for applications installed and disabled by the NAS that have
their own web configurators.
Name This is the name of the application.
Size This is the size of the application at initial download.
Needed Space This is the needed space to complete the installation of the application.
Version This is the version number of the application.
Requires This shows other package/s required to run this application.
Required By This shows which other packages require this application in order to be usable.
Management Page This shows the location of the screens, console or web configurator where you can
manage the application (after the package has been installed on the system).
Source This shows the location of the installed files of the application.
Description This shows a brief description of the item.
Close Click this to close the screen.
To Next Page
Loading...
