Chapter 26 Maintenance Screens
Cloud Storage User’s Guide
310
Figure 192 Maintenance > Log > Report Config: Syslog Server Setting
The following table describes the labels in this screen.
26.5 Configuration Screen
Click Maintenance > Configuration to open the following screen. Use this screen to backup or
restore the NAS configuration settings.
Figure 193 Maintenance > Configuration
Table 119 Maintenance > Log > Report Config: Syslog Server Setting
LABEL DESCRIPTION
Enable Syslog
Server
Check this to enable syslog server.
Server Address Enter the syslog server address you want the NAS to use for its log alerts.
In the table below, check the type of log alerts you want to receive in your e-mail. Select All Log to include all
types of log alerts.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
To Next Page
Loading...
