Chapter 26 Maintenance Screens
Cloud Storage User’s Guide
308
26.4.2 Email Setting
You can enable and configure e-mail alerts from the NAS. In the Report Config screen, click the
Email Setting tab to open the following screen.
Figure 190 Maintenance > Log > Report Config: Email Setting
The following table describes the labels in this screen.
26.4.3 Report Setting
You can have the NAS email you alerts and reports. In the Report Config screen, click the Report
Setting tab to open the following screen.
Table 117 Maintenance > Log > Report Config: Email Setting
LABEL DESCRIPTION
Enable Log Email Click this to have the NAS e-mail log alerts to your e-mail account.
Email To Enter the e-mail address where you want to receive the log alerts.
Email From Enter the e-mail address the NAS uses in the From field of the e-mail header for its log
alerts.
Email Server Enter the e-mail server address the NAS uses to send e-mail alerts,
Email Format Select the e-mail format you want the NAS to use in its e-mail alerts.
Use SMTP
Authentication
Click this if the e-mail server you want the NAS to use for its e-mail alerts requires a
username and password.
User Enter the username for the e-mail server.
Password Enter the password for the e-mail server.
Password
(Confirm)
Re-enter the password to confirm it.
After apply settings,
send a test email
Click this to have the NAS send a test e-mail to the settings you have entered.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
To Next Page
Loading...
