Chapter 10 Control Panel
Cloud Storage User’s Guide
112
10.4.3 Configuring Web Configurator
Click Control Panel > Network > TCP/IP > Web Configurator to configure the port number of
HTTP and HTTPs.
Figure 65 Control Panel > Network > TCP/IP > Web Configurator
The following table describes the labels in this screen.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
Table 42 Control Panel > Network > TCP/IP > Network Interface > PPPoE (continued)
LABEL DESCRIPTION
Table 43 Control Panel > Network > TCP/IP > Web Configurator
LABEL DESCRIPTION
Port Number Specify the port number of HTTP connection.
Note: The port number 8082 is reserved for media streaming.
Enable HTTPS
connection
Select or clear this field to enable or disable HTTPS connection.
Port Number Specify the port number of HTTPS connection.
Allow only
HTTPS
connection
Select this field to allow connection to the Web Configurator via HTTPS only. Clear this
field to allow connection to the Web Configurator via both HTTP and HTTPS.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
To Next Page
Loading...
