Chapter 10 Control Panel
Cloud Storage User’s Guide
113
10.4.4 Configuring Network Diagnosis
Click Control Panel > Network > TCP/IP > Network Diagnosis to test the network connection
to a particular IP address or domain name.
Figure 66 Control Panel > Network > TCP/IP > Network Diagnosis
The following table describes the labels in this screen.
10.5 UPnP Port Mapping Screen
Use UPnP (Universal Plug and Play) port mapping to allow access from the WAN to services you
select on the NAS. It is recommended that you place the NAS behind an Internet gateway firewall
device to protect the NAS from attacks from the Internet. Many such Internet gateways use UPnP
to simplify peer-to-peer network connectivity between devices. UPnP can automatically configure
the Internet gateway’s firewall and Network Address Translation (NAT) to allow access to the NAS
from the Internet.
Table 44 Control Panel > Network > TCP/IP > Network Diagnosis
LABEL DESCRIPTION
Host Select a specific host to perform the diagnosis.
Ping Click this to test the network connection.
Result Displays whether or not the test received a response from the host.
To Next Page
Loading...
