Chapter 27 Protect
Cloud Storage User’s Guide
332
The following table describes the labels in this screen.
27.4 Restore Screen
Use this screen to restore previous backups made with the NAS, including archives and folders from
internal, external or remote NASs to the NAS.
27.4.1 Restore: Step 1
You can access this screen by clicking Protect > Restore.
Table 137 Protect > Backup > Restore Archive: Step 3
LABEL DESCRIPTION
Step 3. Set a restore target and start restoring
Original Location Select this to restore the files to their original location in the NAS.
Other Location Click this to select a folder where you want to place the restored files. Click Browse to
open the following screen.
• Volume - Select a volume from the list.
• Current Location - This is the location of the selected folder.
• Type - This identifies the item as a file or folder.
• Name - This is the name of the folder/file.
Click Apply to save your settings and Cancel to close the screen.
Previous Click this to go back to the previous screen.
Done Click this to run the restore process and go back to the Backup screen.
To Next Page
Loading...
